Harley Davidson

S&S® Black with highlighted fins 114c.i. Milwaukee-Eight® 114"-128" Big Bore Kit 4 & 1/2" Stroke 128" c.i.   Forged pistons with rings, pins & clips 11:1 compression ratio with stock heads Highlighted fins. Bolt-on kit...

Weight: 6.47 The Pingel Electric Easy Shift kit electronically suspends the ignition system allowing the transmission to smoothly shift up or down at the push of a button No need to use the foot shifter and the clutch is used only when starting or...

Weight: 0.00 Forged pistons with rings, pins & clips. 11:1 compression ratio with stock heads. Highlighted fins. Bolt-on kit - no machining required. Includes gaskets. Made in the USA. Not legal for sale or use in California, or on any pollution...

Weight: 2.72lb Simultaneously auto-tunes fuel curves for front and rear cylinders under actual riding conditions Includes WEGO IID dual-channel Hardbody Wide-band oxygen sensor interface The user just programs a table with the desired air-fuel ratio and...

Weight: 5.77 Application Information for S&S ® Camshaft for 1999-Later Big Twins S&S offers a variety of cam grinds for 1999-Later Big Twin gear drive engines. With the exception of the "bolt in" 510G camshafts, S&S cams are high lift and were designed...

Weight: 5.78 Application Information for S&S ® Camshaft for 1999-Later Big Twins S&S offers a variety of cam grinds for 1999-Later Big Twin gear drive engines. With the exception of the "bolt in" 510G camshafts, S&S cams are high lift and were designed...

Weight: 5.81 Application Information for S&S ® Camshaft for 1999-Later Big Twins S&S offers a variety of cam grinds for 1999-Later Big Twin gear drive engines. With the exception of the "bolt in" 510G camshafts, S&S cams are high lift and were designed...

Weight: 5.84 Application Information for S&S ® Camshaft for 1999-Later Big Twins S&S offers a variety of cam grinds for 1999-Later Big Twin gear drive engines. With the exception of the "bolt in" 510G camshafts, S&S cams are high lift and were designed...

Weight: 19.17lb 3" Hardbody Wide open belt drives BDL pulleys are machined from a 356-T6 aluminum aircraft alloy and hard anodized A fiberglass reinforced belt is used in these kits Includes BDL's Quiet Clutch The inner clutch hub uses a 40mm double row...

Weight: 6.08 Application Information for S&S ® Camshaft for 1999-Later Big Twins S&S offers a variety of cam grinds for 1999-Later Big Twin gear drive engines. With the exception of the "bolt in" 510G camshafts, S&S cams are high lift and were designed...

Weight: 46.00lb Fully assembled with in-line top bracket without built in rake (0° rake) The standard length Springer (20" measured from the bottom of the lower tree to the axle center) is comparable to vintage FL model fork length 1" O.D...

Weight: 0.00 Aluminum cylinders cannot be accurately honed and measured without the use of torque plates. This torque plate kit for Milwaukee-Eight cylinders will simulate operating stress conditions when boring or honing the cylinders. These plates...