Belt Drives Ltd

Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the...

Weight (lbs): 3.12 Designed to fine tune the exact pressure needed to match your powerplants horsepower output. Allows your choice of using up to two diaphragm springs, or four to twelve coil type...

Weight (lbs): 1.90 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in...

Weight (lbs): 0.86 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in...

Weight (lbs): 0.87 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in...

Weight (lbs): 0.83 Available your choice of either Dayco or Gates belts these top quality 1" Hardbody Wide drive belts designed for use with 1" Hardbody Wide rear pulley and can be used in...

Weight (lbs): 1.84 The 14mm by 3 3-8" belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate...

Weight (lbs): 4.72 These custom Rear 2 Piston Calipers with hanger brackets and complete hardware kits are designed to replace old, worn-out calipers and brackets Calipers are machined from billet...

Weight: 29.70lb 2" open belt drive with ball bearing lock up clutch kit for stock to extreme horsepower motors Made by BELT DRIVES LTD. Polished Fits: Harley Shovelhead 1970-1978

Weight (lbs): 0.73 Note: 20mm belts are not intended to be used in lieu of a 1-1-2" Hardbody Wide pulley and belt. Use of a 20mm Hardbody Wide pulley and belt is at the users discretion and no...

Weight (lbs): 0.75 Note: 20mm belts are not intended to be used in lieu of a 1-1-2" Hardbody Wide pulley and belt. Use of a 20mm Hardbody Wide pulley and belt is at the users discretion and no...

Weight (lbs): 0.74 Note: 20mm belts are not intended to be used in lieu of a 1-1-2" Hardbody Wide pulley and belt. Use of a 20mm Hardbody Wide pulley and belt is at the users discretion and no...