JIMS MACHINING

Weight: 0.00 Harley-Davidson recently updated the fork cap on touring bikes and you now need a large allen head socket for disassembly. There's a good chance you don't have this size in your tool box...

Weight: 0.00 Installing fork tube caps requires compressing the spring while rotating the cap. This is not particularly difficult with fork legs that have been removed from the bike and securely...

Weight: 1.83 Use this fork slider tube holder for hands-free service or rebuilding Mounts in a vice and clamps fork tube for removal and installation of fork tube plugs Will not scratch fork tubes A...

Weight: 0.56 Normally to gain access to the top stem nut you would need to remove the radio package With this tool you are able to loosen, tighten and torque to specifications the 1 1 - 2 " stem nut...

Weight: 1.90 This tool is designed to easily and squarely install the head cups into the frame neck even when excessive interference fit Also installs the bearing race in late model and custom frame...

Weight: 0.34 Reduce the chances of chipped paint and bruised knuckles Used with driver handle 60751 , this combination makes short work of a clumsy job Jims For Big Twin 1949-Later & Sportster...

Weight: 10.52 Patent pending "Jims Lift Caddy" is a unique product that allows you to move your bike lift, with a bike on it, by yourself on a smooth floor The caddy is only activated when the lift...

Weight: 0.37 This 1 - 2 " Drive Top Fork Tube Plug Socket eliminates the possibility of rounding or burring the top fork tube nut when removal is necessary Jims Fits Big Twin 1949-Later with Hardbody...

Weight: 0.36 Save time and effort when removing the top fork tube bolts with this low profile Upper Fork Bolt Socket Tool. Utilizing a 3 - 8 " drive ratchet or a 1" wrench, this tool works in close...

Weight: 0.47 This tool spreads the cleveblocks far enough apart to allow easy installation of the rear fork on the models listed Includes instructions Jims Fits FLT models 1980-2001 & FXR models...

Weight: 3.95 Removes & installs bushings-cleveblocks This tool can be used with a shop press or two wrenches This design of the installation cup permits the exact depth to be set without guesswork...

Weight: 0.00 Swing arm bearings must be installed and aligned accurately to avoid unsafe handling and ensure control of the motorcycle. Both drive side and brake side bearings, which are different...