Drivetrain

Weight (lbs): 0.73 Note: 20mm belts are not intended to be used in lieu of a 1-1-2" Hardbody Wide pulley and belt. Use of a 20mm Hardbody Wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd or...

Weight (lbs): 0.74 Note: 20mm belts are not intended to be used in lieu of a 1-1-2" Hardbody Wide pulley and belt. Use of a 20mm Hardbody Wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd or...

Weight (lbs): 2.51 With Andrews gears, your transmission will last longer, shift faster, and just plain run better. All gears are made from an alloy steel that is stronger than stock. Andrews gears make the difference, it's hard to believe until you...

Weight (lbs): 2.50 With Andrews gears, your transmission will last longer, shift faster, and just plain run better. All gears are made from an alloy steel that is stronger than stock. Andrews gears make the difference, it's hard to believe until you...

Weight (lbs): 1.81 This is a must have tool designed to be used any time the shifter top has been removed for any reason This tool gauges off of the shifter drum and transfers the exact position of the shift forks in relation to the gears Jims Fits:...

Weight (lbs): 2.89 Steel clutch spring compressor is a necessity any time the clutch is removed or replaced Clutch springs are under extreme pressure and very dangerous if not used with the proper tool Jims Fits: Harley Sportster models with generator...

Weight (lbs): 3.83 Inner Clutch Hub. Fits: Harley 77005. By: BELT DRIVES LTD

Weight (lbs): 2.06 Belt Drives Ltd. Outboard bearing support prevents shaft flex for high horsepower applications 3" Hardbody Wide belt with 8mm teeth 47 x 72 tooth pulley combination produces a 1.53:1 primary drive ratio Includes heavy duty type 66...

Weight (lbs): 1.06 Why wrestle with heavy flywheels when this tool makes working with flywheels hassle free. In addition to saving precious shop time and money, this Sprocket Shaft Holding Tool allows the technician to hold the flywheel assembly in a...

Weight (lbs): 1.85 Used to rotate the flywheel assembly when doing pushrod adjustments, building engines, or when checking operating clearances, such as piston or valve to valve. Can also be used to hold the flywheel assembly from rotating, when torquing...

Weight (lbs): 0.36 Designed to guide and keep alignment of the included 1 - 4 " drill bit in order to drill out a broken exhaust stud Follow up the drilling process with a tap and you are ready to install a new exhaust stud CNC machined from billet...

Weight: 0.85lb Made by V-FACTOR Shifter shaft Fits: Harley 1977-1985 Replaces HD# 34628-75